Check with seller Mini fast india University Of New England

Unistrut comes in all popular sizes. The channels are formed cold from strip steel with a minimal 2.7mm of carbon. Combination members can be welded at the space of 3 inches (76mm) from each other. The channel is constructed of SS GR33, 12 ga. It is the perfect material for welding. It is also available with 16 ga. and Type 304 stainless steel. In general, the longer the length, the more expensive the product will cost.


Unistrut is available in single and channel combinations. The most commonly used back-to back channel is the P1000, which is the two parts of Unistrut P1000 joined by welding. There are three other combinations you can make for your one-to-two or four-channel configurations. For a customized configuration you can also purchase an individual size. In the Unistrut Engineering Catalog has additional information on the various types of channels.


In addition to these common sizes, you can make custom-designed struts, such as A-series, or the miniature 13/16" series. You can even order Unistrut pre-galvanized, which is zinc coated during the hot-dip process. The strut is run through an ongoing zinc coater to remove dirt, and then coated with the molten zinc. The material is suitable for outdoor and indoor applications.


Besides its standard sizes, Unistrut is available in different configurations, including side-to-side and back-to-back combinations. The most common back-to-back channel configuration is a pair of Unistrut P1000. It has a 1-5/8" overall diameter. There are also three- and four-channel combinations. The corresponding dimensions are the A-series, the B-series, and the miniature 13/16" series.


The most popular Unistrut design is known as the P1000. It is often referred to by its name the "senior strut", or 1-5/8" stub. This type of product is typically utilized by electrical and mechanical customers. There are a variety of sizes and combined shapes are also offered. The most popular of them is the A-series as well as the P5500 series. They both come in a variety of heights and channel widths. Between the two, the A-series has the largest channel width.


Unistrut channel Unistrut channel comes in various sizes. The P3300 is offered in either Fiberglass or Special Metals. The A-series is most commonly used one, and the P1000 the largest. It comes in two and lengths of three inches. In spite of the name, all sizes of Unistrut are available with different profiles and colors. The P3300 can also be found with Miniature as well as A-series versions.


The P1000T is the original metal channel for struts. It is the international standard for strut metal framing. It features a continuous slot in the middle and circular holes on all three sides. The P1000T can hold a weight of up to 600 lbs. It can be ganged together to be able to carry heavier loads. However, it is important to know the Unistrut dimensions before ordering.

Contact seller